feed grinding
英 [fiːd ˈɡraɪndɪŋ]
美 [fiːd ˈɡraɪndɪŋ]
横向进磨法
双语例句
- The grind-hardening for two kinds of widely used middle carbon steels were carried out on a surface grinder by creep feed dry grinding, and the characteristics of the hardened layer were studied.
通过对陶瓷刀具材料磨削机理的分析，探讨了影响陶瓷刀具材料磨削的各种工艺因素，并在此基础上提出采用缓进给成形磨削陶瓷刀具材料的工艺方法。 - I plant all year round production of mixed feed grinding machine.
我厂常年生产饲料粉碎混合机组。 - Experimental research on optimizing processing parameters of ultrasonic assisted creep feed grinding ceramics
陶瓷材料超声波辅助蠕动磨削工艺参数优选试验研究 - A new method of enhancing heat transfer in grinding contact zone with jet impinging is presented on the basis of analysis on the mechanism of workpiece burn in creep feed grinding.
在分析缓进给磨削时烧伤机理的基础上，提出了高压射流冲击强化磨削弧区换热的创新构想，并通过传热学基础实验研究了射流冲击强化换热的传热特征。 - Experimental Research on Creep Feed Ultrasonic Grinding ZrO_2 Ceramics
蠕动进给超声磨削ZrO2陶瓷实验研究 - Grinder, millstone-type, for solid mineral materials high accuracy through feed centerless grinding machine
磨石式固体矿物研磨机高精度通磨无心磨床 - High accuracy through feed centerless grinding machine
高精度通磨无心磨床 - Fast wheel chenges replace creep feed grinding
快速砂轮变换代替缓进给磨削 - The experimental investigation on the surface integrity created by creep feed grinding of difficult-to-machine materials
难加工材料缓进给磨削加工表面完整性的试验研究 - An Experimental Study on Creep Feed Grinding Narrow Deep Groove of High Temperature Alloy Blade with Electroplated CBN Wheel
电镀CBN砂轮缓进给磨削高温合金叶片窄深槽的试验研究 - New Creep-feed Grinding Machine
新的缓进给磨床缓进磨削工艺及其设备的研究 - Experiments for producing a rectangular-shaped groove on a flat surface in one pass by creep feed grinding have been carried out using the new polycrystalline CBN ( CBN-U) grit and a representative conventional monocrystalline CBN ( CBN-B1) grit.
用新型聚晶CBN（CBN-U）磨粒和一种有代表性的传统单晶CBN（CBN-B1）磨粒以缓进给方法一次在平面上磨出一个矩型槽进行了试验。 - Experiment Research on Enhancing Heat Transfer of Grinding Contact Zone through Jet Impinging During Intermittent Creep Feed Grinding
断续缓磨射流冲击强化磨削弧区换热的实验研究 - Comparative tests of grinding Al2O3 ceramics with/ without ultrasonic vibration are carried out on the refitted machine tool with the ultrasonic grinding device to reveal the creep feed grinding characteristics and material removal mechanism.
在改装成的超声磨削机床上进行了陶瓷超声磨削与普通磨削的对比试验，以揭示蠕动进给超声磨削加工的磨削特性及其材料去除机理。 - The properties of CBN wheel in creep feed grinding the high temperature alloy and the characteristics of electroplated CBN wheel are introduced.
介绍了CBN砂轮缓进给磨削高温合金的磨削性能及电镀CBN砂轮的磨削特点； - Study on burn process during creep feed grinding by computer simulation technique
缓磨烧伤过程的计算机仿真研究 - Making use of outer-roundness feed grinding machining as research object, this paper developed the dual-ring nested adaptive error forecasting compensation control ( AEFCC) system.
该文以外圆切入磨削加工为研究对象，研制了双环嵌套式误差自适应预报补偿控制（AEFCC）系统。 - Application of Technology on Augmentation of Heat Transfer in the Grinding Contact Zone with Radial Jet Impinging in Creep Feed Grinding
缓进给磨削时磨削弧区径向射流冲击强化换热技术的应用 - Meanwhile, the grinding characteristic of creep feed ultrasonic grinding Al_2O_3 ceramics was analyzed according to the experimental results and ground surface topographies, which provided theoretical and experimental references for the further study on the technology of creep feed ultrasonic grinding Al_2O_3 ceramics.
同时，根据实验数据和磨削表面形貌，分析了蠕动进给超声磨削Al2O3陶瓷的磨削特性，为进一步研究陶瓷蠕动进给超声磨削技术提供了理论和实验依据。 - The Workpiece Temperature Characteristics and Burn Mechanism in Creep Feed Grinding
缓进深磨的温度特征与烧伤机理 - The technical art combined with the properties of super chemical stability, super hardness and super wear resistance of CBN grain and the characteristic of low temperature in creep feed grinding is an ideal way to solving the problem of creep feed grinding of titanium alloys.
CBN磨料本身所具有的极高的化学稳定性、它的超硬超耐磨特性与缓磨本身的低温特征所构成的最佳工艺组合是解决钦合金难磨问题的理想途径。 - Creep Feed Grinding of Titanium Alloy with Resinoid Bonded CBN Wheel& The Application of CBN Wheel in Creep Feed Grinding
树脂结合剂CBN砂轮缓进深磨钛合金&CBN砂轮在缓磨中的应用 - Creep Feed Grinding Machine Retrofitted from a Conventional Surface Grinder
普通平面磨床改装成缓进给磨床 - Variance Characteristics of Process Parameters during, before and after Creep Feed Grinding Burn
缓进深磨烧伤时过程参量变化特征 - The creep feed grinding mechanisms with and without ultra-sonic vibration were analyzed theoretically from the experimental results. With the selected grinding parameters resulted from the experiments, the feasibility experiment of ultrasonic grinding ceramic blade surface was car-ried out.
结合试验结果理论分析了蠕动进给超声磨削和蠕动进给机械磨削加工机理，并根据试验结果选择磨削参数进行了陶瓷叶片型面超声磨削的可行性试验。 - There is a strict requirement for particle size of eel feed. Through a study of the grinding technology, the eel feed grinding and production carried out by the equipment made in our country are satisfactory.
鳗鱼饲料的粒度有严格的要求，通过对粉碎工艺的研究，利用国产设备，完成了令人满意的鳗鱼饲料粉碎工艺和生产。 - Investigation on Grinding Power in Creep Feed Grinding Using a Method Combining Dimensional Anaiysis with Orthogonal Regression
应用量纲分析与回归正交综合法研究缓进给强力磨削功率 - The Latest Advance in the Research of Feed Grinding Particle Size
饲料粉碎粒度最新研究进展 - Creep Feed Grinding of Titanium Alloy with Intermittent CBN wheel
镶块式CBN砂轮缓进给磨削钛合金 - Difference exists in the process of creep feed grinding with/ without ultrasonic vibration using small diameter grinding wheel, and which is explained in theory.
采用小直径磨轮进行蠕动磨削时，超声磨削和机械磨削存在不同之处，从理论上给予了解释。